Home | Products | Applications | About Us | Clients | Enquiry | Contact Us
Products Telephone No.: (0091) (02528) 222641 | Fax: (0091) (02528) 224740
 
G Series
GPH Series
RSPA M – 6 Series
Gas Spring Piston Rod
Riveting Machine
Caulking Machine for
Rolled in Head
SPM Multi Spindle
Attachments for Drilling
Machine
Special Toolings for
Riveting Assemblies Which
are Difficult to Reach OR Accommodate using
Standard Riveting Toolings
Unit Heads for Your
Automation Requirements
Click here to request a Quote
G Series G - 4  |  G - 6  |  G - 8  |  G - 10  
G - 10 |  Cost effective, Bench Type orbital / gyro Electro Pneumatical Riveting Machines
To view the PDF document you require Adobe Acrobat Reader. To download the reader click here
     
G Series
Specifications  
Solid rivet sizes in M.S. 3 mm (0.12") to 10 mm (0.39") diameter
Hollow rivet sizes in M.S. and Non-Ferrous solid rivets 3 mm (0.12") to 15 mm (0.59") diameter
Stroke 0 mm to 50 mm (1.97")
Working Pressure 2 to 7 kg/cm2 (28 to 99 PSI)
Motor H.P. 3 ph 415/450 0.75 (3/4)
Throat Depth 150 mm (5.91")
     
Standard features and accessories provided with the machine
Micromatic stop for precise stroke length adjustment in 0.01 mm increments
Machine column of graded CI Casting having DOVETAIL Slide for Precise daylight (Head Height) adjustment.
One set of Riveting tool and Anvil with machine
T-Slot on Base plate
Filter Regulator Lubricator unit with Gauge
Stepless adjustment of riveting pressure
Anvil holder
Solenoid Valve
Machine is operated by foot switch
   
 
   
Standard Control Panel having following
Electronic Digital Timer adjustable from 0.01 to 9.99 Sec. in steps of 0.1 sec
Switchgear (Contactor, Overload relays) as per MN Standards
Motor Start / Stop Switch
Main Switch on panel
Jog Control (Set operate selector)
Stroke counter (resetable)
Contol panel with lock and key
 
Optional Features
 
Two hand safety control
 
Emergency stop switch
 
Work Lamp
 
Machine with extra throat depth
 
For special Riveting Heads, Multi Spindle Riveting Heads/Machines, Riveting Unit Heads, Riveting Attachments, Pressure Pads, Job Holding Fixtures, Special 'C' Tools, Toolings, etc.
     
 
Plus Points  
  Noiseless Stepless adjustment of riveting pressure
  Easy to maintain & service Long life riveting tools
  Easy to setup and operate High production quantities
  Low power consumption Simple riveting tools, easily exchanged
  Low air consumption All shapes of riveting head possible
  High quality riveted head formation Simple rivet holders, mostly without clamping of the rivets or work pieces
  Precise height control least count 0.01 mm  
 
 
Home | Products | Applications | About Us | Clients | Enquiry | Contact Us | Site Map
Copyrights : Stanley Riveting Machines, 2009